Dediprog is revolutionizing completely the way to work on SPI Flash. The tools and methodologies proposed by Dediprog allow users to program and reprogram the Serial Flash memories in the socket or soldered on the board with very high performance. The following shows the benefits customers can gain by using Dediprog solutions.

I SPI Tools:

Serial Flash Emulator: EM100

To to emulate the behaviors of all the market Serial Flash.

In-System-Programming (ISP) Programmer: SF100

To program or update the memory soldered on your application.

Engineering Programmer: SF200

To program or update the memory in the programmer socket in short time.

All-in-one serial flash programmer: SF300

A combination of in-system-programming, offline programming, and standalone programming capabilities into one palm size unit.

Backup Boot Flash (BBF)

To make your application work on a backup serial flash inserted in a socket without unsoldering your main serial flash from your application. Available for SOP8 207mil, SOP9 150mil and SOP16 300mil packages

Backup Boot Flash Kit

SF100, BBF tools, and testclips connected together can be used as a serial flash emulator or for BIOS recovery; the best choice for code development

II Socket Adaptors and SA Boards:

Socket Adaptors or SA Boards are needed on Engineering Programmers according to the serial flash packages customers use.

III Serial Flash Gang Programmers:

Race100-S20, Race100-S8, Race100-S4

The best performance you could find in the market for volume serial flash programming needs. The performance Race100 offered is in average 8 times faster then other Gang programmers in the market. Available for 20 sockets, 8 sockets and 4 sockets models. Supports all serial flash and packages.