DP3T Plus responds to the industry's ever-evolving demands by handling down to 1x1mm packages. Able to support laser/labeling/ink/inkjet marking, and a maximum of 16 programming sockets to boost productivity for extreme high-capacity devices. The highest UPH goes up to 1300.
With the NuProgPlus series programmer, the system supports dual sockets & highest read/write speed goes up to 180/mb. Auto Teach feature improves productivity by reducing the project setup time. This system is the epitome of versatility, making it an ideal solution for low-volume, high-mix production teams seeking efficiency without compromise.
The system will be able to perform up to 1,300 UPH (Units per Hour)
Able to embed one set of NuProgPlus-S8-E or NuProg-Plus-S16-E, up to 16 programming sites.
Support All IC Families
Supported IC: EEPROM, NAND/NOR FLASH, MCU, eMMC, and UFS, etc.
Supported IC Package: SOP, SSOP, TSSOP, PLCC, QFN, LQFP, and BGA, etc.
Minimum supported size: 1x1mm CSP.
Adjustable Socket Actuating Kit
Adjust socket actuating kits make it easier and quicker to switch to different types of socket adaptors according to the socket size. Therefore, you will not need extra socket actuating kits!
Software Supports Work Project
Able to create a programming file directly through DediWare according to your programming demands. It allows you to start programming right after loading the project, which will greatly reduce human errors.
Clamp Positioning Check
The system will automatically check if the clamps are installed properly before production to avoid machine/product damage caused by unmanned staff mistakes.
Support Different Input/Output Peripherals
Input/Output: Tube, Tape, and Tray.
Auto Teach Feature
Proceduralize- Automatically adjust handler's parameters step by step.
Digitalized- Automatically adjust the heights of nozzles.
Increase the speed of system adjustment.
Self-detection Function- Increase the accuracy & stabilities for nozzles' pick and place.
DediProg's handler can be easily integrated into different MES systems via the API protocol. It is capable of integrating remote control functions, fool-proof programming, and error management to enhance production yield and simplify management.
One Click Project Execution (OPRJ)
The OPRJ one-click activation feature enables fool-proof production (machine process and programming project), remote project editing, project preview, and machine qualification management. It can also integrate into MES systems through the API Protocol.
IC Marking Functions. Provide a variety of labeling methods
Ink Marker supports dot, character, or number.
Inkjet Marker supports character marking.
Laser Marker supports precise character marking.
Label Printer supports QR Code and barcode.
Label Feeder automatically supplies labels to IC for identification.
Provide 2D inspection capabilities to detect pin failures in SOP, QFP, QFN, and BGA packages.
Automated Taping Machine
Electrical Tape Feeders
Auto Tray Loaders
♦ Auto Tray-250
♦Auto Tray-350B Series
Manual Tube In/Out Loaders
♦ MTI-220 (Input)
♦ MTO-230 (Output)
Others Marking Systems
♦ AIM-610 Ink Marker
♦ Inkjet Marker ( Auto Tray-350B-MJH / DP600P-MJH )
♦ ALM-610 Laser Marker
♦ LF-100P2 Label Printer
♦ ALF-100 Label Feeder
AOI Inspection Systems
♦ ANS-640-B (2D)
♦ ANS-640C-B (2D)
Auto Parameter Calibration
♦ Auto Teach
DP3T Plus Automated IC Programming System
DP3T Plus Automated IC Programming System
IC Part Number
IC Size - Length(mm)
IC Size - Width(mm)
IC Size - Pitch(mm)
IC Part Number
Software/Firmware Download Notice
At DediProg, we are keen to ensure system stability and safety.
Please fill in your email and we will send you the critical updates when needed.
Your privacy is important to us, and we are fully committed to keeping your personal information safe. This
this website accessed electronically at the web address: www.dediprog.com related to the download page
of the official website, and how that information is used and shared.
This document outlines our approach to compliance with the General Data Protection Regulation (GDPR)
and all other relevant data-protection legislation. It also sets forth your privacy rights. Please take a
moment to familiarize yourself with our privacy practices.
supplements the other notices and is not intended to override them.
Identity and contact details for the Data Controller
For data protection purposes, DediProg Co., Ltd. is the Data Controller of any personal information
submitted and related to the Websites. You may contact us at:
Purposes of the processing and legal basis
Personal data – exclusively of non-sensitive nature – communicated by you will be processed by the Data
Controller while you will be visiting the following website areas: “Contact”, “Download”.
In “Contact” and “Download”, data is collected and processed in order to:
a. fulfill the requests made by you and provide you with the requested services. In accordance with Article
6 of GDPR, the legal basis for such data processing is the fulfillment of the services required by you (point
b. comply with legal obligations we are subject to; meet our obligations required by the law, by national
and European Union regulations or by Authority orders. In accordance with Article 6 of GDPR, the legal
basis for such data processing is the compliance with a legal obligation (point c).
Apart from the mentioned personal data, freely provided by you on the website, the browsing data –
collected as a result of using our services – may also be processed. In particular:
specific information concerning the device used to connect to the Internet (for example, the kind of device,
information related to the mobile network, etc.);
log info. When using our services or viewing the content provided by us, some information in the server’s
logs may be automatically collected and recorded. This information might include: the data related to the
way in which our service is used, such as search queries; info related to Internet connection data, like IP
addresses and all the other connected data; info on the events generated by the device, system activities,
hardware settings, browser type and language, time and date of the queries and of the referring URL; the
cookies that might identify the browser and the user’s account uniquely.
All the partners involved in the project could use different technologies to collect and record information
when the website is visited and/or a service is used which might require the delivery of one or more
cookies or anonymous identifiers to the user’s device.
Types of data processing
We personal data, exclusively of non-sensitive nature, communicated by you while visiting the website
areas “Contact” and “Events”, via email or when filling out special forms. The processing of the personal
data for the mentioned purposes is done by means of automated or computer-based procedures, in
respect of the rules of confidentiality and security provided by the applicable laws, by the following rules
and the internal procedures established for that purpose.
When and how your information is shared
We undertake not to disclose the submitted data to any unauthorized persons or use it for purposes other
than those specified above. This data can be produced only at the request of authorities entitled by law.
1) We may share your personal information with third-party service providers which perform services and
functions at our direction and on our behalf such as our accountants, IT service providers, printers,
payment providers, lawyers, providers of security and administration services and other business advisers.
2) The data can be communicated to the partners of the DediProg Co., Ltd. to public and private
individuals, physical or legal persons (legal, administrative and fiscal offices, computer companies, or
others) that must be necessarily informed for the right fulfillment of the purposes of the project, for
contractual, administrative and accounting purposes, as to provide the interested parties with a guarantee
that they can use and enjoy the website.
3) We may share your personal data with a third-party auditing organization in accordance with our
legitimate interests to verify aggregated statistics about circulation and usage of our services or to review
our policies, processes and procedures for compliance with relevant standards. Data storage and retention
We will retain your personal information as needed to fulfill the purposes for which it was collected. We
will retain and use your personal information no longer than is necessary to comply with our business and
legal obligations. In general, we make reference to the time limitations related to any potential auditing, to
the ongoing provision of services to users, and to the applicable statute of limitation.
Your data subject rights
You have several rights under data-protection law in relation to how we use your personal information.
You have the right, free of charge, to:
Request a copy of the personal information we hold about you in a structured, commonly used and
Rectify any inaccurate personal information we hold about you.
Withdraw your consent where we have relied upon your consent to process your information.
Erase the personal information we hold about you subject to certain exceptions.
If technically feasible, have your personal information transmitted to another data controller in a machine-
readable format at your request.
Restrict processing of your personal information in certain circumstances.
Object to our use of your personal information for our legitimate interests, for profiling and for direct
Not be subject to a decision which is based solely on automated processing where that decision produces a
legal effect on you or otherwise significantly affects you. We do not make automated decisions of this
Lodge a complaint with the appropriate data-protection authority if you have concerns about how we
process your personal data.
These rights are in some circumstances limited by data-protection legislation. If you wish to exercise any of
these rights please contact us at email@example.com.
We will take measures to verify your identity which we will do by reference to copies of acceptable
identification documentation supplied by you.
We will endeavor to respond to your request within a month. If we are unable to deal with your request
within a month we may extend this period by a further two months and we will contact you and explain
Consequences of not providing information
All data communicated by the interested party or sent while registering for an event is indispensable for
the provision of the requested services. Your personal identification data and email address are, therefore,
obligatory, as strictly connected to the nature of the required services. It follows that the consent to the
processing of data is mandatory and any refusal would put us in the conditions of not being able to execute
the requested services. Furthermore, the processing is necessary for compliance with a legal obligation to
which the controller is subject, as specified in point b.
Use of Google Analytics
DediProg may use Google Analytics on www.dediprog.com to grasp how they are used by visitors. Google
Analytics gathers access information without specifying individuals. This information only uses to monitor
and improve our website which can bring more convenient.
information. Please see the following site to know the details of Google Analytics.
https://www.google.com/analytics (Google Analytics™ is a trademark of Google Inc.)
Linked Sites from DediProg Site
Our website may include links to other websites. Although we pay full attention to the selection of the
linked sites, we cannot assume responsibility for the protection of personal information or contents on
those Web sites outside www.dediprog.com.
Any change of our privacy statement will be posted to this page. We have the right to modify this privacy
statement without other notice.