Dediprog

StarProg-F Engineering Programmer

Model Name : StarProg-F
Manual programmer that supports all Flash IC.
USD$550
Product File Type File Description Version Download File size Last Update
StarProg-F Engineering Programmer Software Dediware Software (For StarProg Series, ProgMaster Series, NuProg Series, eMMC series, and K110)

[Modified Content]
1. Fix dwcmd -d download project fail while multiple StarProg-A/K100/K110.
2. Fix Block index issue on load file for NAND.
3. Fix command line issue while use over 10 StarProg-ATE.
4. Fix the issue that batch setting is able to set Program and Verify after load the project with erase only.
5. Fix the Buffer checksum issue after select IC part number.
6. Fix the Log shows USB communication fail while press Buffer > Option/Config.
7. Fix the Programmer index issue while pressing socket counter.
8. Fix Load Prj issue if the project is recreated through LoadPrj.
9. Fix the issue that put in the CD message after press selectPrj
10. Remove blank RPMB for NuProg-E.
11. Fix the dialog of Load for NAND.
12. Fix the program result issue for NuProg.
13. Fix the programmer order method while NuProg and ProgMaster are used on the same computer.
14. Fix NuProg download vector option issue.
15. Set limit to 50 words on SavePrj option.
16. Fix Command line programmer order issue for K110/K100/StarProg-A
17. Fix detect UFS issue for NuProg.
18. Fix icon level issue.
19. Fix start time of project report through Dediware command.
20. Fix project with password issue through Dediware command.
21. Fix project with serial number through Dediware command.
22. Fix low density project issue on Dediware.
23. Fix checksum issue for ATTINY1617.
24. Fix Dediware StarProg/ProgMaster login fail issue after computer reboot, and optimize Dediware connection.


[New Feature]
1. Support download vector to NuProg-F8
2. Support Default check control
3. Add entry engineering mode through Dediware command
4. Add password on login options
5. Add new IC part numbers


[Remark]
Firmware Support
StarProg-U/F, please use FW 2.2.10 ;
ProgMaster, please use FW 2.2.51 or above ;
NuProg-E FW 1.6.16 & FPGA V144 ;
NuProg-F8 Master : FW 1.6.14 & FPGA V144 , Slave : FW2.2.16 & FPGA V137;
NuProg-F8A Master : FW 1.6.16 & FPGA V144 , Slave : FW2.2.16 & FPGA V137;
StarProg-A/K100/K110 FW 4.0.17
StarProg-ATE FW 2.1.29
3.12.57.3 New 67.75MB 2019-04-15 10:43:01
StarProg-F Engineering Programmer Software Dediware Software (For StarProg-U/F, K110, ProgMaster Series, NuProg Series, and eMMC-F8)

[New Feature]
1. First version for K110
2. Add new part number

[Remark]
Firmware Support
StarProg-U/F please use FW 2.2.10 ;
ProgMaster please use FW 2.2.40 or above ;
NuProg-E FW 1.6.16 & FPGA V144 ;
NuProg-F8 Master : FW 1.6.14 & FPGA V144 , Slave : FW2.2.16 & FPGA V137;
NuProg-F8A Master : FW 1.6.16 & FPGA V144 , Slave : FW2.2.16 & FPGA V137;
K110 FW 3.0.23

3.12.41.57 67.92MB 2018-11-30 17:52:19
StarProg-F Engineering Programmer Software Dediware Software (For StarProg-U, StarProg-F, ProgMaster Series, and NuProg Series)
[Modified Content]
For StarProg/ProgMaster
1. Fix project report while pressing close Dediware
2. Fix failure rate for TMS320F2812
3. Fix USB transmission issue for Phison project
4. Fix TI TXT hex issue for MSP430 series
5. Fix electronic check issue
6. Fix SPI NAND issue
7. Fix USB communication fail while pressing selectprj
8. Fix Chip checksum calculation issue while press chip checksum in the ReadIC function

For NuProg
1. Scan master optimization
2. Fix entry copy mode issue
3. Fix CRC calculation issue
4. Fix vector download automatically
5. Fix file information display issue after press detect chip
6. Fix Wipe fail in the engineering mode


[New Feature]
For StarProg/ProgMaster
1. Modify programmer order method
2. Support to record project information in the server log.
3. Remove the skip button for save project

For NuProg
1. Add electronic check option.
2. Remove whole chip copy
3. Upgrade the auto-tuning speed


[Remark]
Firmware Support
StarProg-U/F: please use FW 2.2.10 ;
ProgMaster: please use FW 2.2.40 or above ;
NuProg-E: FW 1.6.16 & FPGA V144 ;
NuProg-F8 Master: FW 1.6.16 & FPGA V144 , Slave : FW2.2.16 & FPGA V137;
3.12.41.13 66.91MB 2018-11-05 09:47:44
StarProg-F Engineering Programmer Software USB Driver
- Update Digital Signature
5.23MB 2016-11-10 18:19:13
StarProg-F Engineering Programmer Manual USB Driver User Guide for Win 8 / 8.1 / 10
Applicable Model:EM100Pro / EM100Pro-G2 / SF100 / SF600 / SF600Plus / EE100 / StarProg Series / ProgMaster Series
1.0 645.00KB 2018-09-10 09:59:38
StarProg-F Engineering Programmer Manual Application Note-eMMC Detailed Settings in Dediware 1.0 1.67MB 2017-08-11 13:14:13
StarProg-F Engineering Programmer Manual Application Note-How to use Unique key on dediware 2.1 1.37MB 2017-05-08 17:25:01
StarProg-F Engineering Programmer Manual Dediware Software User Manual for NAND Flash 2.1 1.66MB 2017-05-08 17:21:44
StarProg-F Engineering Programmer Manual Dediware Command Line User Manual 1.1 615.29KB 2017-05-08 17:20:22
StarProg-F Engineering Programmer Manual Dediware Software User Manual For SPI NOR Flash Option Bytes 1.0 1.81MB 2017-05-08 17:17:43
StarProg-F Engineering Programmer Manual Dediware Software User Manual 2.2 2.17MB 2015-04-07 15:02:38
StarProg-F Engineering Programmer Manual StarProg Series User Manual 3.0 898.74KB 2014-12-27 11:23:00
StarProg-F Engineering Programmer Flyer StarProg-F Flyer 904.24KB 2017-11-29 16:10:42