Dediprog
Old browser version, some functions may not be available.

K110 Serial Flash and EEPROM Programmer

Model Name : K110
Support SPI NOR Flash, SPI NAND Flash, and EEPROM.
USD$330

Feature

K110 is an engineering IC programmer that supports the majority Flash ICs on the market. Powered by USB port and does not need external power, also provides Command Line for software redevelopment. Palm-size and space saving. It provides online or offline Flash IC programming through the different adaptor. 

K110 offers user the best solution for development and low volume production.
 

Highlights

  • High-speed programming

Built-in high-speed processor to achieve high programming speed.

Programming Speed (P + V):

IC Type IC P/N Data Size P+V Time(sec)
Engineering mode Standalone mode
SPI NOR W25Q64FV 8MB 16 19
GD25Q128B 16MB 46 52
SPI NAND GD5F2GQ4UB 128MB 100 113

 

  • Support serial bus storage IC and package type
    • SPI NOR Flash, SPI NAND Flash, and EEPROM.
    • SOP, WSON, USON, and BGA.
  • Support Serial Interface Protocol
    • SPI, I²C, and uWire.
  • Support a variety of file formats
    • Binary, Intel Hex, Motorola, and ROM, etc.
  • Support Command Line
    • Provide Command line for software redevelopment.
  • Support Stand-alone mode
    • IC programming without PC. 
  • ATE Port
    • With ISP adaptor, provide Busy/Pass/Error and Start pins for remote control.
  • Support 1.2V low voltage IC
  • Multiple programmers support to program IC in parallel
     
ISP-SPI/IIC (Included in the package)
ISP Adaptor SPI Interface
ISP Adaptor IIC Interface
ISP-uWire (Optional)
ISP Adaptor uWire Interface
ISP Adaptor ATE Port

Standard Package

  • K110 IC Programmer x 1
  • USB Cable x 1
  • AC 100~240V to DC 5V/1A Power Adaptor x 1
  • SPI/IIC ISP Adaptor with ISP Cable x 1
  • ATE Split Cable (MA-IDC3B-05F-DUP254-10F-028-A) x 1

Related Accessories

10-Pin ATE Port Split Cable (2.54mm)
10-Pin ATE Port Split Cable (2.54mm)
USD$15
10-Pin ISP Split Cable (2.00mm) (Compatible with EE100 and K110)
10-Pin ISP Split Cable (2.00mm) (Compatible with EE100 and K110)
USD$25
10-Pin ISP Split Cable (2.54mm) (Compatible with EE100 and K110)
10-Pin ISP Split Cable (2.54mm) (Compatible with EE100 and K110)
USD$25
DIP socket ISP adaptor for SPI and IIC
DIP socket ISP adaptor for SPI and IIC
USD$80
ISP adaptor for SPI and IIC (Pin compatible with EE100)
ISP adaptor for SPI and IIC (Pin compatible with EE100)
USD$15
ISP adaptor for uWrie (Pin compatible with EE100)
ISP adaptor for uWrie (Pin compatible with EE100)
USD$15
ISP Cable For EE100 and K110
ISP Cable For EE100 and K110
USD$6
ISP Testclip(SO8) For EE100 and K110
ISP Testclip(SO8) For EE100 and K110
USD$50
Product File Type File Description Version Download File size Last Update
K110 Serial Flash and EEPROM Programmer Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110, NuProg-E, and NuProgPlus-U8)
[Modified Content]
1. Support NuProg-E2
2. Fix load hex file issue
3. Add a customized folder dialog
4. Add S3909 MCU verification message
5. Fix firmware update fail issue
6. Add get socket SN for auto handler
7. Enhance eMMC extCSD setting dialog in DediWare eMMC/UFS GUI
8. Do not allow user to list project file during UFS/eMMC during copying
9. Display full path of network drive disk in file/folder browser
10. Fix ProgMaster load verify only project file fail issue.
11. Auto delete programmers default project file after project stopped.
12. Add to display LC4800/4600 calculation mode
13. Fix sometimes eMMC/UFS can not stop project.


[Remark]
Firmware Support
NPPEU 1.6.2/1.6.3
NPPG 1.1.5 or 1.1.7 for encrypted project
NuProgPlus BaseUnit FPGA V33
NuProgPlus CY3 FW 1.0.13
ProgMaster 2.2.66
 3.16.8.3 New 156.06MB 2021-03-12 10:28:12
K110 Serial Flash and EEPROM Programmer Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110, NuProg-E, and NuProgPlus-U8)

[Modified Content]
1. Fix edit window chip checksum issue
2. Change get socket status interval time to 200ms
3. Client will not close if programmer plug out
4. Fix NuProgPlus project file size bigger than 1GB download issue
5. Improve reset usb procedure
6. Fix MCU load file option byte fail issue (remove 2 variables from du_header struct which is for security programming)
7. Fix StarProg-ATE create project issue

[New Feature]
1. Add LUXSHARE unique key
2. Support encrypted project
3. Add image size and turn on/off VCC function for operation dll

[Remark]
NPPEU 1.4.15
NPPG 1.1.5 or 1.1.7 for encrypted project
NuProgPlus BaseUnit FPGA V33
NuProgPlus FW CY3 FW 1.0.12
ProgMaster 2.2.66
 3.15.26.2 123.21MB 2020-10-13 15:44:24
K110 Serial Flash and EEPROM Programmer Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110 NuProg Series, and eMMC Series. Not including NuProgPlus-U8)

[Modified Content]
1. API Modification

[New Feature]
1. Add checksum calculation- MD5
2. Support new devices
- MCU: 85
- Flash: 21
- eMMC: 14
- UFS: 6

[Remark]
Firmware Support
StarProg-U/F, please use FW 2.2.16;
ProgMaster, please FW 2.2.52 or above;
StarProg-A/K110 FW 4.0.20
 3.13.27.4 86.37MB 2020-03-19 13:40:27
K110 Serial Flash and EEPROM Programmer Manual Dediware Software User Manual for NAND Flash 2.4 2.87MB 2021-04-20 13:30:58
K110 Serial Flash and EEPROM Programmer Manual Dediware-Checksum Calculation Methods 717.72KB 2020-02-10 10:19:54
K110 Serial Flash and EEPROM Programmer Manual K110 User Manual 1.1 2.06MB 2019-01-16 16:11:59
K110 Serial Flash and EEPROM Programmer Flyer K110 Serial Flash and EEPROM Programmer Flyer 780.48KB 2019-11-28 10:39:02