Dediprog
Old browser version, some functions may not be available.

ProgMaster-U8 Universal Gang Programmer(8 Sites)

Model Name : ProgMaster-U8
ProgMaster-U8 is a universal gang programmer, allows you to program 8 IC at a time and able to program various IC kinds!
This item is unavailable for online purchase.

Feature

ProgMaster-U8 is a gang programmer with ultra high speed, which supports all IC families on the market. Equipped with 8 programming sites with an LCD keypad that allows stand-alone function. ProgMaster-U8 has been designed and optimized to reach IC maximum performances without compromise on the programming quality, stability, and reliability and making it the best value for mass production.

 

Highlights

  • High programming speed
    • Built-in high-speed processor to achieve high programming speed.
Timing Reference (P+V)
MX25L1655D 8s
S29GL064S 16s
S34ML01G200T 48s
STM32F302CCT 9s
ST BlueNRG-132 21.5s

 

  • Completely support all IC families and packages
    • EEPROM, MCU, SPI NOR/NAND Flash, Parallel NOR/NAND Flash, eMMC/eMCP, CPLD, FPGA...etc.
    • DIP, SOP, SSOP, TSOP, PLCC, QFN, BGA...etc.
    • Regular software update.

 

  • Software supports NAND FLASH skip Bad Block and partition programming.

 

  • Built-in memory card slot for project programming
    • Able to save project file to SD card for more stable and faster transmission.

 

  • One computer can connect to multiple ProgMaster-U8 at the same time.

 

  • Stand-alone function allows you to program without a computer and only need to select and start the project programming through LCD keypad.

 

  • Exclusive design for productivity improvement 
    • You can start programming once the project file is loaded; it will also avoid the human errors when importing the project file or the IC models.
    • Three advanced working modes:

A. Manual Mode: Press “Start Button” to execute programming after inserting IC in all sockets.
B. Auto Detection Mode: Each socket works independently. Programming is executed instantly after inserting IC to socket.
C. Handler Mode: Use in the DediProg auto handler system.

ProgMaster-U8 with Hand Press Fixture: It helps you to push down 8 sockets easily and simultaneously.
Engineering Mode
For engineers and expert to access advanced features for development, repairing etc.
Production Mode
For operators in production to control multiple sites and improve the throughput.
Standard Package
  • ProgMaster-U8 x 1
  • USB Cable x 1
  • Power Cable x 1

 

Optional Purchase
  • Socket Adaptor
Product File Type File Description Version Download File size Last Update
ProgMaster-U8 Universal Gang Programmer(8 Sites) Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110, NuProg-E, and NuProgPlus-U8)
[Modified Content]
Fix TPS53659[QFN40], TPS53679[QFN40], TPS53622A[QFN40], TPS53622[QFN40], TPS53658[QFN40], TPS53659A[QFN40], TPS53678[QFN48], TPS53681[QFN40] analysis xml file issue

[Remark]
Firmware Support
NPPEU 1.7.6/7
NuProgPlus BaseUint FPGA V33
ProgMaster 4.0.8
3.16.17.17 New 151.08MB 2021-07-15 11:22:40
ProgMaster-U8 Universal Gang Programmer(8 Sites) Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110, NuProg-E, and NuProgPlus-U8)
[Modified Content]
1. DediWare General GUI shows IC partition name in load file list.
2. eMMC project does not support blank check.
3. Fix NuProg-E verify fail, but report pass issue.
4. Improve get socket info speed (get socket info before project running).
5. Modify download project timeout to 250s.
6. Fix MD5 checksum display issue.

[New Feature]
1. Add USB dongle unique key function.
2. Add more clear notification for swap under Edit Window.

[Remark]
Firmware Support
NPPEU 1.7.6/7
NuProgPlus BaseUint FPGA V33
ProgMaster 4.0.8
3.16.16.3 149.61MB 2021-06-11 17:00:09
ProgMaster-U8 Universal Gang Programmer(8 Sites) Software Dediware Software (This version is for StarProg Series, ProgMaster Series, K110, NuProg-E, and NuProgPlus-U8)
[Modified Content]
1. Support NuProg-E2
2. Fix load hex file issue
3. Add a customized folder dialog
4. Add S3909 MCU verification message
5. Fix firmware update fail issue
6. Add get socket SN for auto handler
7. Enhance eMMC extCSD setting dialog in DediWare eMMC/UFS GUI
8. Do not allow user to list project file during UFS/eMMC during copying
9. Display full path of network drive disk in file/folder browser
10. Fix ProgMaster load verify only project file fail issue.
11. Auto delete programmers default project file after project stopped.
12. Add to display LC4800/4600 calculation mode
13. Fix sometimes eMMC/UFS can not stop project.


[Remark]
Firmware Support
NPPEU 1.6.2/1.6.3
NPPG 1.1.5 or 1.1.7 for encrypted project
NuProgPlus BaseUnit FPGA V33
NuProgPlus CY3 FW 1.0.13
ProgMaster 2.2.66
3.16.8.3 156.06MB 2021-03-12 10:28:12
ProgMaster-U8 Universal Gang Programmer(8 Sites) Software USB Driver
- Update Digital Signature
5.23MB 2016-11-10 18:19:13
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Dediware Software User Manual for NAND Flash 2.4 2.87MB 2021-04-20 13:30:58
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Dediware-Checksum Calculation Methods 717.72KB 2020-02-10 10:19:54
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Application Note-How to use Unique key on dediware 2.2 2.40MB 2019-08-19 14:43:31
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual USB Driver User Guide for Win 8 / 8.1 / 10
Applicable Model:EM100Pro / EM100Pro-G2 / SF100 / SF600 / SF600Plus / EE100 / StarProg Series / ProgMaster Series
1.0 645.00KB 2018-09-10 09:59:38
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Application Note-eMMC Detailed Settings in Dediware 1.0 1.67MB 2017-08-11 13:14:13
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Dediware Software User Manual For SPI NOR Flash Option Bytes 1.0 1.81MB 2017-05-08 17:17:43
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual ProgMaster Series User Manual
Revised--Remove ProgMaster F4 and F8
3.2 1.97MB 2016-03-02 16:26:36
ProgMaster-U8 Universal Gang Programmer(8 Sites) Manual Dediware Software User Manual 2.2 2.17MB 2015-04-07 15:02:38
ProgMaster-U8 Universal Gang Programmer(8 Sites) Flyer ProgMaster-U8 Universal Gang Programmer Flyer 873.16KB 2021-10-27 09:52:23